Eachine E010S 65mm Micro FPV RC Drone Quadcopter 800TVL CMOS Based On F3 Brush Flight Controller
- Sellerbilibouille.com
- List PriceUS$57.99piece
- Sale PriceUS$49.99~61.99piece
- ShippingFree Shipping
- Ratings
Product Description
Eachine E010S 65mm Micro FPV Racing Quadcopter with 800TVL CMOS Camera Based On F3 Brush Flight Controller
User Manual,Please Click:
FLYSKY Receiver version
DSM Receiver version
Frsky Receiver version
Note:The FLYSKY version is not compatible with FS-i6s R9B, R6B system.
User Manual,Please Click:
FLYSKY Receiver version
DSM Receiver version
Frsky Receiver version
Note:The FLYSKY version is not compatible with FS-i6s R9B, R6B system.
This quadcopter's FLYSKY version of the receiver is AFHDS, without AFHDS 2A.
The AFHDS 2A transmitter can be compatible with AFHDS version of the receiver.
On the frequency, select AFHDS on the remote control's operation menu, because the FS-i6 or FS-i6X transmitter, the factory default are AFHDS 2A.
| Description: | |||
| Brand: | Eachine | ||
| Item NO: | E010S | ||
| Body weight: | 26 g (with battery) | ||
| Battery Power: | 3.7V 45C 240mAh (the old version is150mAh) | ||
| Wheelbase: | 65mm | ||
| Frame: | ABS high-quality | ||
| 615 Coreless Motor: | Long diameter (without motor axis): | 15mm | |
| Wide diameter: | 6mm | ||
| Weight: | 4.8 g | ||
| Speed: | 59000 rpm ± 12% | ||
| F3 Brush Flight Controller: (the version can be selected) | F3+FRSKY | - F3 is an open source flight control to support the current international mainstream Cleanflight and Baseflight platform - Integrated FRSKY compatible 8CH receiver, serial output - Support FRSKY communication protocol, 8 channels - Built-in DC-DC boost circuit, can be powered by IIC and UART interface other devices, support 1S lithium battery - Drive motor frequency: 2K (this frequency can be set by the user, the maximum frequency can be set to 32K) - Gyro support manual mode, horizontal mode - Firmware upgrades and tunables can be done via Micro USB.Adjust the interface with Baseflight Configuration and Cleanflight-Configuration | |
| F3+FLYSKY | |||
| F3+DSM | |||
| 800TVL 40CH 25MW VTX 1/3 "CMOS FPV Camera | ||
| Camera: | Sensor: | 1/3 "CMOS |
| Clarity: | M7 800TVL camera | |
| View Angle: | 150° FOV horizontal view angle 170° DFOV opposite view angle | |
| Signal system: | NTSC/PAL (one-button switch) | |
| Power consumption: | [email protected] | |
| Operating voltage: | 3.6-5.5V | |
| Lens mirror diameter: | 2.1mm IR coated FOV150(Level) | |
| Transmitter: | Supporting video system: | NTSC/PAL |
| Output impedance: | 75 Ohm | |
| Operating signal intensity: | 23~24dBm | |
| Output power: | 25mW | |
| Wireless channel: | 40CH | |
| Operating voltage: | 3.6V~5.5V | |
| Current: | 100mA | |
| Sound carrier: | 6.5MHz | |
| Transmit Frequency Table: | Band A : | 5865,5845,5825,5805,5785,5765,5745,5725 |
| Band B : | 5733,5752,5771,5790,5809,5828,5847,5866 | |
| Band E : | 5705,5685,5665,5645,5885,5905,5925,5945 | |
| Band F : | 5740,5760,5780,5800,5820,5840,5860,5880 | |
| Band R : | 5658,5695,5732,5769,5806,5843,5880,5917 | |
| Weight: | 3.8g | |
| Size: | 26x20x18mm (without antenna) | |
| Function: | - Camerapicture comparable to CCD | |
| - True wideangle lens 150° FOV Horizontal viewing angle 170° DFOV diagonal viewing angle | ||
| - Ultra-low power, ultra-lightweight, extremely suitable for smaller aircraft | ||
| - Turn to the R channel,ABEF 4 indicator lights bright,can choose1.2.3.4.5.6.7.8 | ||
Features:
1. Without assembly and commissioning
2. Open - source flight control can be adjusted according to the player 's personal preferences self - stability, semi - self - stability, manual, convenient for different levels of players
3. According to the race standard RaceBand VTX CAM 40 channel transmitter,Cmos 1/3 800Tvl high-definition camera,NTSC / PAL system can be a key switch
Package included:
1x Frame kit (without shock absorber rings)
4x 615 59000 rpm ± 12% Coreless Motor
8x Blades(2 Sets )
1x F3_EVO_Brush Flight Controller
1x 800Tvl 40cH 25mW Camera
1x 3.7V 45C 240mAh battery (new version)
1x USB Charger
1x Manual
1x Blade removal tool