XANES ML06 2700LM 3xT6 LED 4-Mode IPX6 Waterproof Bike Light HeadlampTemperature Control Power Display No Battery

XANES ML06 2700LM 3xT6 LED 4-Mode IPX6 Waterproof Bike Light HeadlampTemperature Control Power Display No Battery
  • Sellerbilibouille.com
  • List PriceUS$13.99piece
  • Sale PriceUS$13.99piece
  • ShippingFree Shipping
  • Ratings4,1 (381)

Product Description

Features:

1. Width voltage input: 6V~14V' With power switch
2. Output: DC 5V 4A with two channel outputs:
* OUT1 for external device such as servo, motor, robots, mechanical arm, intelligent card etc. (output interface: HT3.96);Max current is 2A, and can be programmed via GPIO programing to control the output of power supply; please refer to SAMPLE CODE 1;
* OUT2 (GPIO output for raspberry pi);Max current is up to 4A if the OUT1 be closed; CAN'T be programming control, it will be output to raspberry pi directly if the switch be turned on;
3. Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming, please refer to SAMPLE CODE 2;;
Temperature range and accuracy:
-25 ℃ ~ + 100 ℃ when the ± 2 ℃
-55 ℃ ~ +125 ℃ when the ± 3 ℃
4. Cooling Fan can be replaced, please refer to FAN SPECIFICATIONS;
5. Standard HAT size.

Fan specifications:

- Side length is 30mm;
- Thickness is 7mm;
- Parameters: Voltage 5V, current 0.15A, speed 1OOOOR.P.M, noise 25dB, air volume 2.95CFM


Notes:

The Raspberry Pi main board is not included.

Click for more info.


Packing Included:

1 x Board
1 x Mini fan (with install screws)
1 x HT3.96-2P Male head
Programmable Smart Temperature Control Fan and Power Expansion Board For Raspberry Pi
Programmable Smart Temperature Control Fan and Power Expansion Board For Raspberry Pi
Programmable Smart Temperature Control Fan and Power Expansion Board For Raspberry Pi
Programmable Smart Temperature Control Fan and Power Expansion Board For Raspberry Pi

Similar Products